Showing posts with label cabochons. Show all posts
Showing posts with label cabochons. Show all posts

Friday, October 21, 2011

GRAND OPENING SALE! 25% OFF!


I'm announcing a GRAND OPENING SALE in my supply shop, The Glass Goddess! Now from Oct, 21 thru Nov 4. 25% off your purchases! Just use the coupon code "25% OFF GRAND OPENING" when you check out!

High quuality fused dichroic glass cabochons, yummy gemstone briolettes and even some agate cabochons!

I will continue to add new items to the store.

So please enjoy my pretties, leave some comments and I really, really hope you'll like what you see!

Saturday, October 15, 2011

About My Supply Store, The Glass Goddess, Reason #1


The reasoning behind my supply store, The Glass Goddess is twofold, well okay it's threefold.

Here is reason number one-

I've had a lot of people ask me if I sell my dichroic glass cabochons or tell me I that I should.

I have to admit that I have a hard time putting my dichroic cabochons up for sale. I find that when I'm making them I am already creating jewelry with them in my mind! Those that I have definite plans for I put aside for my use. The rest I'm putting up for sale in my supply shop. If I decide I want to use a listed cab I can always drop the listing and use it. Also I have enough cabs to keep me busy for quite a while at the rate I'm (not) using them.

All of my cabochons are made using compatible fusing glass in a digitally controlled kiln. Quite a bit of work goes into the making of these and they are fired a minimum of two times.

I prefer clean, precise shapes in my cabochons. I think growing up in rockhound country has influenced my ideas of what a cabochon should be. Smooth, clean, polished shapes, rounded on the edges.

My cabochons start with me fusing dichroic sheet glass with either a base glass or top it with a clear glass "cap". I call these fused glass pieces "slabs".

I take these slabs and draw the desired cabochon shapes onto the slab. I take my time pondering and agonizing over the best, most efficient use of the glass slab in front of me.

I rough cut the shapes out of the glass slab using a Taurus III ring saw. As these are rough I use a grinder to clean up the shapes. If I think the cabochon is to thick I will use a flat beveling grinder to thin these cabochons. I do this more for earring cabs that pendant cabs to reduce the weight. I also grind a bit of a bevel on the edges to help round them out nicely during the fire polishing cycle. Once I've finished shaping them I switch to a channeling bit on the grinder. It grinds channel or groove that can be used for wire wrapping the cab. After all of this I prep the cabs for another cycle in the kiln. I treat the ground edges with a devitrification solution to ensure a shiny, polished finish. When the solution is dry into the kiln they go for a final fire polishing. When they come out I check them for quality. If I'm not happy another round of grinding, flat grinding and channeling will ensue.

Friday, July 2, 2010

New Pendants & New Cabochons!















I have been so very busy these past few weeks. Weeding, driving my aunty around and working on glass. I've been so busy that I didn't even realize until this evening I haven't blogged in quite a while. (blushes in embarrassment)

So here is my works in progress. A bunch more cabs for earrings, pendants and rings. Also here are some cabochons that I have gotten finished in the past few weeks. I have been listing pieces and now have a bunch of my fancy Modern Bold Collection Pendants listed. I've also started listing some of my newer Image Pendants. And to top this all off I had the pleasant surprise of finding out that I am the featured AJDJSS, Artfire Jewelry Design & Jewelry Supply Shops studio of the week!

I will be at the Central Oregon Saturday Market tomorrow and will be at the Old Fashioned Fourth of July Show in Bend's Drake park on Sunday for the Fourth of July.

Saturday, May 8, 2010

Disappointment Equals More Work



Here are the finished cabs. Upon closer examination I had to re-channel about two thirds of these and treat them as if the had devitrified. I etched them and have applied a boraxo solution to correct them.

Also note to myself-Do not EVER mess with my favorite fire polishing cycle. I may use a digital control box on my kiln, but the temperatures and holding time have been determined by my experience over time.


I etched the "doodles" I had ready. Here are the results. Unfortunately I didn't leave the etching cream on long enough on two of my favorites. I like the hearts, green fern and the swirls best. I definitely think some of my doodles are better off done using some resist paper.

I have more glass fusing into slabs in the kiln too.

Friday, May 7, 2010

Cookin' In The Kiln!



I'm cookin' tonight, glass that is! This shelf of beauties are cooking as we speak. This is the final stage in the process. A trip though the kiln to give them a nice smooth, polished look and feel. The bottom picture turned out blurry, but the color of the white cabs is good.

As of tomorrow morning they will be taken from the kiln, wiped off and all ready for packing! Some will be sent off for others to have fun with while others will go into my supply shop and the rest into "The Hoard". I plan to have the completed orders ready for shipping by Monday.

BUT I'm not done making cabs yet. I have more slabs yet to fuse and more cabs to cut! Still haven't cut into the big piece of rainbow ripple on black! And then there are the confetti cabs I plan to make and some out of that lovely pink and green glass. ;)

Wednesday, May 5, 2010

New Cabochons In The Works!




Here's what I've been working on the last couple of days. Cabs, cabs and more cabs! With more planned in the near future. These are all ground and ready to channel. (except for the one uncut one in the picture) I plan to start channeling these cabs tomorrow.

The cabochons in this first picture are available and I can bear to part with them.

The cabs in the second picture I would really like to keep, but can probably be talked into parting with!

And as for the third and final picture-Hands off!!! These are MINE! ;) Although I can make more of the red and white cabs.

If you are into wire wrapping the channel around the edge can come in handy. Also different styles of wire work may not need the channel, but tend to hide it for the most part. Of course for those setting pretties in silver and gold-who will ever see the channel once it's in the bezel?

In the very back of the last picture you can see a few un-ground cabs. I will get to them tomorrow. I am letting the "ink" outlines set up a bit. I think squares are the hardest shape to do. Keeping them square is a real PITA! The more I have to mark & grind-the smaller they tend to get.

Tuesday, April 13, 2010

Decisions, Decisions!
















Believe it or not this is the stage that takes me the longest and I find it the hardest! Deciding how to cut up the glass to make the most of it's beauty and to not waste any more than necessary!

The first picture is of the whole piece. It is about eleven inches long by about two inches. The others are close-ups.Actually I feel I have made a great start. What do you think?

Friday, March 12, 2010

Spring Maple Leaves, Dichroic Glass Jewelry Set





















Here is some green for spring! I took a set of my handmade dichroic fused glass cabochons in a rich, mossy green and fused 22k gold maple leaf images into the top of the glass. I've wrapped them all up in 14k gold filled wire. I suspended the earring cabs from 14k gold filled ear wires. I used a simple wire wrapped bail on the pendant and then suspended it from an eighteen inch green cable necklace.


These pretty Spring Maple Leaves set is now listed in my Artfire studio!

Monday, March 1, 2010

Working While On The Road















Well I started wrapping cabs while it was my aunts turn to drive. I managed to get eleven pairs wrapped! Now I still need to finish them by putting on the earwires. I wrapped the red hearts last night so I could wear them today. I took this picture in my room here at the hotel/motel. The best lighting was in the bathroom. I think it isn't too bad of a picture (although the color on the turquoise cabs doesn't really show due to glare). My Aunt Jackie was quite taken with the little round cab so I am going to wire wrap it in silver (her preference) and gift it to her tomorrow.

We had a lovely drive up here to Hoaquim/Aberdeen, WA from Bend, OR. It is about a five hour drive not counting any stops! Actually this the best drive up here that I have ever had. Hardly any traffic, no rain, not to sunny and no snow with dry pavement over the Mt. Pass. There was more snow when we came up last fall. Three winters ago the snowpack was so high my kid was climbing the snow and jumping off the roof of the rest area on Mt. Hood! The snow was almost gone. Nice for driving but this also means a dry summer as there isn't much of a snowpack to provide us with water for the coming summer....

I know I said I'd be gone and not posting. I decided at the last minute to take my laptop along. The inn we are staying at has free wireless! So I decided to post anyway. I will be at another hotel/motel tomorrow so if I post is still unknown.

Friday, February 26, 2010

Whats Cookin'?






























First things first, this mama's gotta brag! My son had to draw a picture of his shoe in drawing class. I was really impressed when I saw it on the coffee table this morning and so was his dad and grandpa. He also got an "A" on it!

If you can't tell I did some cookin' this this morning! I ran the kiln and fired the 22k gold decals. They are all just lovely. I took a couple of quick pictures to share. I forgot to take the pictures before I put them away. Taking pictures of them on the black does help to show why I use white for the background though. The first picture is of all the fired pieces. The second is a close up. I was trying to get a picture of the cab in the top left hand corner. The green cabs to the upper right look really good unlike the left!

Sunday, February 21, 2010

Blue Diamond Dichroic Glass Earrings & A Sneak Peek!

































Today I listed these stunning cobalt Blue Dichroic Glass Earrings. This is another pair of cabs from the hoard! This leaves me one more pair to list tomorrow. I do have another pair of earrings to upcycle and three more pairs of cabs that are waiting to be wrapped out of the hoard.

Sneak Peek! The second picture shows the rest of the cabs I have cut out and ground. They still need to be channeled and fire polished. I have fifteen pairs of earring cabs and one ring cab. I have decided it is high time to start paying for my kiln usage. So I plan to run a full shelf the next time I fire polish. (Usually I run a full shelf when firing slabs together.)

The last picture shows the next slab of glass I'll be cutting cabs out of. I have already cut out the ring cab and one heart. Then I will start cutting out of the other glass slabs I have fused up. I have two different colors of dichroic ripple glasses fused onto white, blue, red and two different orange shades. Some of these are from a batch I fused last fall. I was very disappointed in them. Looking at them I don't think they are all that bad, they are just not colors I'm wild about. Time has given me some perspective.

Thursday, January 21, 2010

Fire Polishing!















I cut out all the designs I did in Spectrum's 96 line. The others that I did in Bullseye 90 are cloudy/slightly divitrified. I will be etching the tops of them, applying a divitrification solution and then firing them. Then I will finish them. As for these I will be able to start wrapping them tomorrow!

Tuesday, January 12, 2010

Mike's Rainbow Trout





















Here are the windows my ex, Mike has just finished. A lovely pair of Rainbow Trout done completely in clear and iridized glass. There is even a pair of small bugs that the trout are jumping to catch. These will be flanking a fireplace. I think he has done a wonderful job. Yes, he drew these up from scratch too!

For me today was a busy, but unproductive on the jewelry end. I did laundry, accompanied my aunt, filled holes dug by puppies and taught stained glass. I did manage to get my wire though. I live four or five blocks from my favorite bead store and have decided that I need to start walking there instead of combining going there with other errands. So while I was there I asked "If I walk there with my little dog, could he come in with me?". The answer was yes! So from now on if the weather isn't to horrid Brutus and I will be walking there. He is a shop dog and has good people manners so I don't have to worry about him being a brat either. I decided to give you a peek of the next cab I'm finishing into a pendant.

Thursday, December 3, 2009

Ripples & Unnamed Dichroic Glass Wire Wrapped Jewelry




Wanted to take a quick moment and share the finished pieces from today! Hope you like! The first set I plan to call "Ripples" The color is very mesmerizing and soothing. I have no clue of a name for the gold ones yet. I have all the earrings wrapped and finished from that last batch of cabs. I am still working on the matching pendants though. I have to run, it's late and I still have to pack my toolbag!

Sunday, November 29, 2009

Day 29 Of AEDM




Today I spent the afternoon and evening cutting out those cabochons in new shapes. The first pictures shows the glass slabs marked with the new shapes ready to cut out. The second picture shows the Taurus III ring saw I use to cut out my cabs, my safety glasses and a beeswax based goo that helps to keep the marks on the glass.

After I cut them out I use the grinder to clean up the shapes. The third picture shows the cabs all cut and ground and ready for firing. I am trying something a bit different with this batch. I'm going to fire polish this batch then I'm going to channel them. Then I will fire polish them again.


Also I cleaned the stove-YUCK. And I made turkey and noodles from scratch. I make my own noodles using the recipe my mother taught me. I take the turkey carcass and boil it to get the rest of the meat off and make the stock.

Thursday, November 19, 2009

Day 18 Of The AEDM Challenge



I started my day out by getting these butterflies cut out and ground. (day 18 of the AEDM challenge) I had planned to only make two of these butterflies , but ended up with three color combinations. The one on the far left is in shades of orange, yellow and amber. The middle one is blue and purple and the one on the right is purple and blue.

Then because it was sunny, dry and not to cold I decided to sand my kiln shelves off. I have been putting that dreaded task off for a while now. Three kiln shelves with the kiln wash sanded off of them and two customers later the shelves were clean. Next it was time to give them a fresh coating of kiln wash. I mixed it up and painted it on. Helpful hint-To speed up the drying process between coats I use a heat gun to dry the coats of kiln wash. I suppose a hairdryer would also do the trick, but have never tried it. This also works on molds as well!


For day 18 of the AEDM challenge I finally made up a shelf of 12mm dichroic cabochons. I have been needing to make these for a while. I received the dichroic glass I needed to make these at least two weeks ago. The kiln shelves were were ready to go and I needed to have them done by Friday morning.
When I wake up in the morning I will have 184 dichroic fused glass cabochons. That is 268 pieces of glass! All hand cut, cleaned and arranged on that kiln shelf!

p.s. I finished this at one am PST. I have to go to bed and sleep before it is "tomorrow" to me. So expect another post for day 19!

(I'm sorry. I have no idea why the photos disappeared. Just added them...again.)

Tuesday, September 15, 2009

Fall Cleaning Of The Glass Shop & Studio, Part I


As I posted the other day it is just about time for me to start my fall cleaning spree and get ready for the long winter months inside where we'll be spending most of our time. I love the winter as long as I'm looking out from a nice cozy inside!

This is a picture I took of our studio late last winter. As you can see it is a cluttered mess. And it looks even worse now!

We are working around a large box of fused and slumped glass dishes we had on consignment and have now been returned. As usual there are stacks of glass leaning up against the counters and the usual huge glass pile up next to the cutting board! (That is the large white grid on the left of the picture.) The floor is now well covered in large splats of solder from all of the repairs Dad has done lately.

So I have decided I will start here. First we (Dad and I) will have to get our messes cleaned off of the work benches and the fused/slumped glass off the floor. This means sorting, cleaning and organizing..again. Then it will be time to scrape all those solder splats, sticky bits of copper foil tape and other miscellaneous sticky stuff off of the floor. Then I can sweep and mop. Somewhere in all of that I also have to clean off the windowsills.

This is my "big" project for the week along with making more little cabochons. I have a couple of new colors, a hot pink and a pale lavender that I need to make a bunch of along with re-stocking the other colors. I also need to make some small cabs that are about 10-12mm besides the 8-9mm ones. These start out as 1/4 inch and 3/8 inch pieces of glass. I need these in all colors.
These are the size I used in the "Stardust Earrings" Hopefully I can remember to keep an accurate record of the time I spend cutting, cleaning and stacking the glass so I can get a good idea of the labor involved.

Friday, June 26, 2009

Going On A Road Trip To The Locks


The Sternwheeler/Portage Days at Cascade Locks is this weekend. My hearty helpers and I are going to give it a try and see how it goes. So I will be gone thru Sunday this weekend.

This is one I am trying on a recomendation. I do know this has been going on for at least fifteen years as I have black powder friends that attend. I was also told in Febuary that the motels were already booked for this weekend and that the news reported the event as cancelled due to the weather last year and although it wasn't, there was a very good turnout.

We are leaving tomorrow morning and hope to get there at a reasonable time. We will set up the booth, tables, etc; Get our campsite and then hopefully go surprise our friends!

I look forward to a fun, exciting and long weekend. The show is open from ten am to nine pm on Saturday and ten am to five pm on Sunday.

Just wanted to share some close-ups of the cabs now that they are all "cooked". I really pleased with them.

Thursday, June 25, 2009

New Batch of Dichroi Cabs!





Add Image





















This is what I have been up to this week. Making up a new, big batch of dichroic fused glass cabochons. Included are my ideas for using frit and my experiments in "scribbling" on dichroic glass with a sharpie!

The frit cabs are the ones with the speckles of colors. I wasn't real happy with most of them at first, but fused the pale ones onto a white base and "Wow"! Now they have this lovely, opalescent sheen and the colors show better. I look forward to pairing some of these with precious and semi-precious gemstone beads. I actually have beads picked out for the red/orange/amber cabs.

The cabs with the images on them turned out absolutely amazing in my opinion! I just can't get over how stunningly elegant and classy they are. I definitely plan to do more "scribbling" on dichro!

In this batch I've finally included some cabs for the "Bling Rings", bolo ties and money clips I've been meaning to make for way to long. I'm excited to finally be able to offer some men's jewelry for sale. Just a little bit late for Father's Day though. Now I just have to remember/find where I stashed those ring blanks for the Bling Rings!

Thursday, February 26, 2009

Finished Little Cabs


Here's a picture of the earrings I've created from my little, 6mm dichroic fused glass cabochons. I think they are fabulous.
I love the red ones with beads and crystals and I like the champagne/peach ones with small bead caps, the pinks ones are clean and simple. I had fun with the green ones wrapping them with some other small cabs I had set aside for earrings. Once they were finished I looked at them and saw a simple goddess figure shape so "Green Goddess Earrings" they will be.
Please comment on your favorites!
I'm so excited by all the possibilities that these little gems open up. So many different styles for wire wrapped earrings or combining them with other cabs. Or maybe several dangling off wire wrapped findings chandelier style. My brain is afire with all the possibilities! Not to mention the possibilities of combining them in pendants and with other pendant cabs. It took me a while to decide what to do with these with all the options I thought of.